|
|
||||||||||||||||||||
|
||||||||||||||||||||
Standard
SDD Xtreme Specifications| Standard Model | SDDX2418: Solid Back SDDX2418DT:Drive-thru |
| Dimensions | Outside: 16'4"wide x 10'10"high x
24'2"deep Inside:14'0"wide x 9'0"high x 24'0"deep Drive-in doors: 10'0"wide x 8'0"high Access Door: One drive-in door is bi-fold with integral access door 2'6"wide x 8'0"high. A second access door, 3'0"wide x 7'0"high is located in the rear wall. |
| Filters | Pre-filter: PF2050 with self-supporting frame Intake: AFC Laminar III full ceiling filter bank Exhaust: AFC paint arrestors, 20" x 20" x 2" media |
| Lights | 18 - 4-tube, color-corrected T8 fluorescent fixtures |
| Fans | Exhaust: 2 - 24" tube-axial fans with
non-sparking blades Intake: 1 - 34" tube-axial fan with non-sparking blades |
| Motors | Exhaust: 2 - 2hp, 208/230/460VAC, OTDP Intake: 1 - 5hp, 208/230/460VAC, OTDP |
| Air flow | up to 14,000 CFM of turbulence-free filtered air or more than four complete changes of booth air per minute. |
| Heat System | DFM800R with 1.075 MBTU burner and fully automated control panel |
| Constructions | Panels: 18GA galvanized steel, powder coated Supports: Powder-coated 12GA & 14GA galvanized angles |
| Basement | none required |
Note that the information shown above is for a standard model. All AFC spray booths are fully customizable and custom models will differ from information above.
AFC Finishing Systems, Oroville, Ca. 800-331-7744
Home | About Us | Industrial Equipment | Testimonials | Links | Contact Us | Sitemap| Spray Booths | Powder Coating Equipment| Office Modules| Industrial Curing Ovens| Resources