|
|
||||||||||||||||||||
|
|
||||||||||||||||||||
| Standard Model | SDDP2412CSB: Solid back, ETL
listed SDDP2412CDT: Drive-thru, ETL listed |
| Dimensions | Outside:
16'4"wide x 11'10"high x 24'2"deep Inside:14'0"wide x 10'0"high x 24'0"deep Access Doors: 3'0"wide x 7'0"high Drive-in doors: 10'0"wide x 8'0"high, optional windows |
| Filters | Pre-filter: PF2050
with internal self-supporting frame Intake: AFC Laminar III, quantity of 12 used in full ceiling filter bank Exhaust: AFC paint arrestors, 20" x 20" |
| Lights | 12 - 4-tube, color-corrected T8 fluorescent fixtures |
| Fans | Exhaust: 2 -
24" tube-axial fans with non-sparking blades Intake: 1 - 34" tube-axial fans with non-sparking blades (optional) |
| Motors | Exhaust: 2 - 2hp,
208/230/460VAC, OTDP Intake: 1 - 5hp, 208/230/460VAC, OTDP (optional) |
| Air flow | up to 14,000 CFM of turbulence-free filtered air or more than four complete changes of booth air per minute. |
| Heat System | Optional DFM800R or AMS1000 |
| Constructions | panels: 18GA
galvanized Supports: 12GA & 14GA galvanized |
| Basement | none, exhaust to the side of the booth |
Note that the information shown above is for a standard model. All AFC spray booths are fully customizable and custom models will differ from information above.
AFC Finishing Systems, Oroville, Ca. 800-331-7744
Home | About Us | Industrial Equipment | Testimonials | Links | Contact Us | Sitemap| Spray Booths | Powder Coating Equipment| Office Modules| Industrial Curing Ovens| Resources