AFC Eurostyle Spray Booth Specification

Standard Eurostyle Specifications

Standard Model	DDEDFS2416: Solid Back DDEDFD2416:Drive-thru
Dimensions	Outside (side-heated): 19'6"wide x 12'1"high x 24'1"deep Outside (end-heated): 14'6"wide x 12'1"high x 29'0"deep Inside:14'0"wide x 10'0"high x 23'6"deep Drive-in doors: 10'0"wide x 8'0"high Access Door: 3'0"wide x 7'0"high
Filters	Pre-filter: PF2050 with internal self-supporting frame Intake: AFC Laminar III full ceiling filter bank Exhaust: AFC paint arrestors, 20" x 24' rolled media
Lights	16 - 4-tube, color-corrected T8 fluorescent fixtures
Fans	Exhaust: 1 - 34" tube-axial fan with non-sparking blades Intake: 1 - 34" tube-axial fan with non-sparking blades
Motors	Exhaust: 1 - 3hp, 208/230/460VAC, OTDP Intake: 1 - 5hp, 208/230/460VAC, OTDP
Air flow	up to 14,000 CFM of turbulence-free filtered air or more than four complete changes of booth air per minute.
Heat System	DFM800R with 1.075 MBTU burner and fully automated control panel
Constructions	panels: 3 1/2" thick laminated, galvanized panels, painted inside and out. Supports: Powder-coated 12GA & 14GA galvanized angles
Basement	Proprietary design as integral part of exhaust system with grating covering for filter area.

Note that the information shown above is for a standard model. All AFC spray booths are fully customizable and custom models will differ from information above.

AFC Finishing Systems, Oroville, Ca. 800-331-7744