The Custom Aire EXHAUST CHAMBERS by AFC give you the ability to convert part of your shop or factory into a spray area while controlling the over-spray and solvents in the air. These exhaust chambers are designed to have correct orientation of the exhaust filter cells to promote uniform air movement through the cross section of the paint spraying area. Conservative design of the fan and motor assure that the air flow will be adequate. The standard unit comes with a solid back wall.

A variety of options are available to allow for custom installation. Options include doors in back wall and/or explosion proof or totally enclosed motors.

The Custom Aire EXHAUST CHAMBERS are fabricated from 18GA galvanized steel and are easily assembled following AFC assembly instructions.

All models come complete with:

• Tube-axial fans with non-sparking blades
• Open type drip proof motor for use at 208/230/460 VAC, 60Hz, 1 or 3 phase
• All paint arrestors and grids
• Manometer to monitor porosity of paint arrestors
• 6 feet of exhaust stack, roof jack, and up-flow cap
• Installation hardware, blueprints, and assembly instructions