|
|
||||||||||||||||||||
|
||||||||||||||||||||
Standard
Downflo Specifications| Standard Model | DDFS2412: Solid Back DDFD2412:Drive-thru |
| Dimensions | Outside: 15'4"wide x 11'10"high x
24'4"deep Inside:14'0"wide x 10'0"high x 24'0"deep Drive-in doors: 10'0"wide x 8'0"high Access Door: 3'0"wide x 7'0"high |
| Filters | Pre-filter: PF2050 with self-supporting frame Intake: AFC Laminar III full ceiling filter bank Exhaust: AFC paint arrestors, 20" x 24' roll media |
| Lights | 12 - 4-tube, T8 fluorescent fixtures complete with tubes and clear, tempered glass |
| Fans | Exhaust: 1 - 34" tube-axial fan with
non-sparking blades |
| Motors | Exhaust: 1 - 3hp, 208/230/460VAC, OTDP |
| Air flow | up to 14,000 CFM of turbulence-free filtered air or more than four complete changes of booth air per minute. |
| Heat System | Optional DFM800R or AMS1000 |
| Constructions | Panels: 18GA galvanized steel Supports: 12GA & 14GA galvanized angles |
| Basement | Proprietary design as integral part of the exhaust system with grate covering for floor filter area |
Note that the information shown above is for a standard model. All AFC spray booths are fully customizable and custom models will differ from information above.
AFC Finishing Systems, Oroville, Ca. 800-331-7744
Home | About Us | Industrial Equipment | Testimonials | Links | Contact Us | Sitemap| Spray Booths | Powder Coating Equipment| Office Modules| Industrial Curing Ovens| Resources