|
|
||||||||||||||||||||
|
||||||||||||||||||||
Standard
Thermal Xtreme Specifications| Standard Model | DDATE2412: Solid Back DDATED2412:Drive-thru |
| Dimensions | Outside: 14'7"wide x 11'10"high x
24'7"deep Inside:14'0"wide x 10'0"high x 24'0"deep Drive-in doors: 10'0"wide x 8'0"high, bi-fold one side Access Door: One drive-in door is bi-fold with integral access door 2'6"wide x 8'0"high. A second access door, 3'0"wide x 7'0"high |
| Filters | Pre-filter: PF2050 with self-supporting frame Intake: AFC Laminar III full ceiling filter bank Exhaust: AFC paint arrestors, 20" x 24' roll media |
| Lights | 12 - 4-tube, T8 fluorescent fixtures complete with tubes and clear, tempered glass |
| Fans | Exhaust: 1 - 34" tube-axial fan with
non-sparking blades Intake: 1 - 34" tube-axial fan with non-sparking blades |
| Motors | Exhaust:
1 - 3hp, 208/230/460VAC, OTDP Intake: 1 - 3hp, variable speed, 208/230/460VAC, OTDP |
| Air flow | up to 14,000 CFM of turbulence-free filtered air or more than four complete changes of booth air per minute. |
| Heat System | AMS1000E with 1.075 MBTU burner with automated control panel |
| Constructions | Panels: 3 1/2" thick laminated, galvanized
panels, painted inside and out Supports: Powder coated 12GA & 14GA galvanized angles |
| Basement | Proprietary design as
integral part of the exhaust system with grate covering for floor
filter area
The information shown above is for a standard model. All AFC spray booths are fully customizable and custom models will differ from the information above. |
.Home | About Us | Industrial Equipment | Testimonials | Links | Contact Us | Sitemap| Spray Booths | Powder Coating Equipment| Office Modules| Industrial Curing Ovens| Resources