AFC manufactures four different air make-up systems - three heated
and one fresh air only. The first of these is the DFM
heated air make-up system. It consists of the DFM800R (for standard
booths) and the DFM2000 (for larger truck booths). The DFM is a direct
fired air make-up system. This means that the system fires directly into
the air stream. Firing directly into the air stream results in 98%
efficiency, providing a rapid temperature rise in the booth and saving
you money on operation cost. During the baking (curing) cycle, this
system re-circulates the intake air several times around the heater
prior to entering the booth for a higher temperature rise and a cleaner
burn.
|
 |
DFM800R/DFM2000
Two-stage or full
modulation direct fired air make-up system designed for use on
automotive spray booths. Damper in the system allows for multiple
passes through the furnace resulting in higher temperature rise in
the bake cycle. |
Quote
Request |
|
|
|
The second system is the AMS air make-up system, consisting of the
AMS1000 (for standard booths) and the AMS2000 (for larger truck booths).
This system is also a direct fired air make-up system. It works exactly
like the DFM systems without the re-circulation option.
|
|
|
|
 |
AMS1000/AMS2000
Two-stage or variable
frequency drive, direct fired air make-up system designed for use
on automotive spray booths. Variable frequency drive allows for
additional heating adjustment during the bake cycle. |
Quote
Request |
|
|
|
The third heated air make-up system is designed for area
where less heat is needed. Unlike the first two systems,
this one is an indirect heater. It fires into a heating chamber
instead of directly into the air stream. This system is designed
for use with our reversed air flow booth and consists of model
OAS400 for an outside attached air make-up system and AS400 for
an inside attached air make-up system. Although designed for use
with the reversed air flow booth, it is easily adaptable for use
with other booths as well. |
|
|
| |
|
|
|
|
|
 |
AS400/OAS400
Indirect fired air
make-up system designed for use on automotive spray booths.
This air make-up system is designed for milder and warmer climate
where small temperature rise is required. |
Quote
Request |
|
|
|
The fourth system is designed for systems that
require only fresh air intake for positive booth pressure.
|
|
|
|
 |
AMS000
Fresh air make-up system
designed for balancing the air pressure inside spray
booths. This system has no heating and is used to provide
positive pressure to new or existing spray booths only. |
Quote
Request |
|
|
 |
JetAir System
The JetAir System is a
cost effective, versatile system that significantly reduces the cure
or dry time of both solvent and waterborne coatings. Reduce
flash time of waterborne basecoat to as low as 2.5 minutes! Click on
the link above or the picture to the left to view a brochure on the JetAir System. |
Quote
Request |
|
|
 |
AFC’s Turbo Cure System
This new system utilizes four fans mounted in the upper four
corners of the spray booth, which circulate air in the booth during
the cure. |
Quote
Request |
|
|
 |
In addition to the different air make-up systems, AFC also
manufactures drying enclosures. Drying enclosures are designed to be used
with your spray booth to improve the efficiency of your spray booth by
enabling greater utilization of the spray booth itself. After the
vehicle has been sprayed, it is moved into the drying enclosure where
drying is carried on. The spray booth is immediately available to begin
work on the next vehicle. The rate of production can be significantly
increased by this system.
|
|
|
|
AFC also
custom-builds other specialized systems to meet individual
needs. Please contact AFC if your
needs are other than what we have shown above. Also refer to our industrial page for industrial ovens
and other heating systems. |
|
